When to acid-wash your swimming pool
Owning a swimming pool comes with its joy and prestige, but with all the joy and the prestige, maintenance is inevitable. We have to maintain our swimming pools and even at times need to use acids in washing them. This might raise questions as to why we need to acid wash our swimming pools. Well, if you are having this kind of a question, here is your answer. We need to acid wash our swimming pools to get rid of the stains that build up in our pools due to the hard water and algae. When these elements are present, the water turns murky, giving unpleasant view, unlike the sparkling blue waters we all wish for.

It’s definitely true that we need to acid wash our swimming pools, and this leads to the question when do you acid-wash your swimming pool? Well when to acid wash your pool depends on how frequently you treat and maintain your swimming pool. It is recommended that you can acid-wash your swimming pool after every five to seven years, again depending on the manner at which you have been treating and maintaining your pool water. For a public pool, then the acid-washing process could be more often, compared to that of a private or personal pool.

Despite the many expert advices that try to respond to the question of when to acid-wash your pool, personal observations can be helpful in choosing your own frequency of acid-washing. You can observe your pool floors and the water. When hard water forms calcium deposits and other stubborn stains on your pool, then you should know that it is time to acid wash it. Remember that more frequent acid-wash on your swimming pool is not advisable. Too many washes will prompt plastering of the pool surfaces. If you have thin and old plaster on your pool, then be warned, do not acid-wash more often. 

Now you have an idea of when to acid-wash your swimming pool. The next thing to know is the procedure to use when you are going bout acid-washing your swimming pool. When acid-washing your pool, first make sure it is drained. Next, scrub your pool surfaces and use muriatic acid and a recommended water solution to remove the thin layer of the top-coat that had formed on the surface of your pool. Remember that this is done manually by scrubbing using an acid brush. After acid scrubbing on all the surfaces, neutralize the used acid with soda ash then rinse it away. More details on how to neutralize the acid, click here.

Unresponsive pool to acid-wash?
  Having an unresponsive pool to acid-wash? If your pools does not get cleaned after a series of acid-washes, then do not worry. There is always a second option for you. For such pools, then plastering is an option. In this case, use a professional to determine the effectiveness of the acid-wash, before taking the next step of acid-washing.
​
Extra tip.
I know you have found your answer on when to acid-wash your pool and now you want to know how it costs. The cost of an acid-wash will definitely depend on the size of your pool. Feasible estimates being $0.60 to 0.65 per square feet. For more information, click here. 

How to avoid swimming pool repairs

How to clean your pool

​La Mesa Pool Service 
6919 Wait Drive 
La Mesa, CA 91941
(619) 880-3398

​The common and most frequently carried out pool repairs include; waterproofing, repairing of cracks, leaks and slippery surfaces. When good care is not taken, then frequent repairs are inevitable and as we know, these repairs come at a cost. Despite the cost, the entire process of frequent repairs can be avoided.  Always try to keep your pool in a tip top shape. Make sure that your pool is running at recommended levels and do something extra each day to ensure the safe operations of your dear pool. The following are helpful tips on how to avoid swimming pools repairs.

• Pumps and filter systems

Pumps and filter systems are very fundamental in your pool. Always keep them clean at all times. They have been found to be the most frequently replaced in a swimming pool and yet the easiest to maintain. So always keep them clean and checked at all times, to avoid uncalled for costs.

• Water levels

Keep your water level at an optimum. Do not have too much water or too little. When there is no enough water in the pool, the pumps and filters work overtime to have enough water running in the pipes and this is dangerous as it shortens the life of the pumps. On the other hand, when the water levels are high, the walls are unnecessarily strained and this can lead to them cracking.

• Pool inspections

Make it a routine to inspect your pool for any signs of damages. Inspections help you notice potential damages before they occur and this can save you money, before a damage occurs. Do inspections inside, outside and of systems of your pool each week, and you will definitely notice a potential crack on your pool.

• Balanced water chemistry

It is always advisable to test your water chemical levels on weekly basis and balance them if necessary, to avoid coatings on your pool surface, which on the other hand are hard to get rid of. Always pay attention to the P.H levels and the alkalinity of your water.

• Have maintenances carried out

If you ae not experienced to carry out pool maintenances, always have an expert do it for you. For instance if your water becomes cloudy, have an expert check it and do the necessary. Always have the minor repairs carried out rather than waiting for major damages that will definitely cost you more.

• Back washes

Never back wash the sand filters of your pool too often. The recommended way to handle the back washes is always to have an expert do it for you. You can always find these pool experts within your area of residence.

• Dissolved solids

Check your dissolved solids at a regular basis. The total dissolved solids in your pool water need to be checked in about every six months as experts recommend. To have them checked, you can take samples of your pool water to the experts for recommendation and for a monthly maintenance, which will be administered at a cheaper cost, rather than waiting for expensive eventualities. 

If any question about having your pool serviced. call La Mesa Pool Service at (619) 880-3098.

How to clean your pool

La Mesa Pool Service 
6919 Wait Drive 
La Mesa, CA 91941
(619) 880-3398

It’s everyone’s desire to have his or her pool well cleaned with the sparkling blue waters. Well if you want to keep the sparkling blue waters, here are tips on how to clean your pool. In order to clean your pool, you will need elbow grease, cleaning accessories, and the pool filter and sanitization chemicals. These are fundamental components if you want to keep you your pool clean.

In this post, we will go through various steps that are inevitable if you really desire to know how to keep your pool clean. Before undertaking the entire process of ensuring that your pool is clean, remember that the frequency at which you clean your pool depends on how the pool is often used. It is therefore true to say that a frequently used pool will require frequent cleaning, compared to a rarely used pool.
​
In order to clean your pool, the following activities are fundamental. They are inevitable for clean pools. Firstly, in our section of learning on how to keep your pool clean, you will need to skim leaves and debris in your pool. This is a critical step in keeping your pool clean. In this step, use a long handled leaf skimming tool to gather the leaves and debris that are on the surface of the pool water. 

 In learning how to clean your pool, a brush is a must to use. Use the brush when trying to keep your pool clean. The brush is an important tool when it comes to removing dirt on the sides and at the bottom of the pool, and always ensure that you brush the dirt sediments towards the major drainage of the pool so that they are easily vacuumed.
​
After you have used your skimmers and brushes, the next step to ensuring that you keep your pool clean is to connect the vacuum head and the hose to the filter. The dirt is filtered out as well as vacuuming the collected dirt during the entire cleaning process. 

The skimmers are tools that are frequently used when cleaning your pools and they get extremely dirty. In order to keep your pool really clean, you will also need to keep the skimmers clean too. Ensure that your skimmers are clean each and every time you want to use them. You can also clean the after use.

All the leaves and debris have been removed from the pool. The skimmers themselves are clean, with the vacuum well working. The next thing in how to clean your pool is to check your water circulation and filters. Check the skimmers, the pumps, the pump strainers as well as the filters. If they are properly working, then the water is well circulating, with pool chemicals being in a position to work effectively. The water is well filtered too and you can now have a smile on your face as now you can enjoy the sparkling blue waters you once hoped for.
​
The last step in how to clean your pool is to frequently test your pool water, and add chemicals when necessary. This should be done in accordance to an expert’s or manufacturer’s instructions. With frequent checks, your pool water is kept free from any algae, bacteria, including any other organic matter that may develop in your pool waters. 

For any questions about pool cleaning, contact our support team @ (619) 880-3398

Wiki How- How To Cleaning Your Own Pool

La Mesa Pool Service 
6919 Wait Drive 
La Mesa, CA 91941
(619) 880-3398

Hello and welcome to our new blog. Today i just wanted to introduce our company and let you know about this amazing blog and the great things to come. we will posting DIY tips for pool owners, keeping you up to date with the latest pool tech, and even do some Q&A on some of the most common questions we get form our clients. 

So once again welcome and stay tuned for the great things to come!!